[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B1036-17Ignition voltage
(Ignition voltage)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Ignition high voltage signal
ThresholdPower supply malfunction (high voltage) of air bag diagnosis sensor unit
Diagnosis delay time3 seconds or more.
 
 
POSSIBLE CAUSE
  • Malfunction of battery voltage (16 V or more)
  • Connection malfunction of harness or connector
  • Internal malfunction of air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON and wait for 3 seconds or more.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END