[Previous][Next]
Automatic Brake Hold Warning
 
 
DESIGN/PURPOSE
Notifies the driver when the vehicle is moved or may start moving while automatic brake hold is being applied.
 
 
Waning Message
DesignWarning messageDescription
—Press brake pedalWhen the vehicle moves or possibly moves while automatic brake hold activates.
Caution Steep slopeWhen the automatic brake hold activates on the steep slope.
Steep Slope Apply foot brakeWhen the brake pedal is not depressed while the automatic brake hold activates on the steep slope for 3 minutes approximately.
Press brake to operate switchWhen the automatic brake hold switch is pushed without depressing brake pedal while the automatic brake hold activates.
 
 
SYNCHRONIZATION WITH WARNING CHIME
Warning message—
Press brake pedalApplicable
Caution Steep slopeNo
Steep Slope Apply foot brakeNo
Press brake to operate switchNo
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Warning message—
Press brake pedalApplicable
Caution Steep slopeNo
Steep Slope Apply foot brakeNo
Press brake to operate switchNo
 
 
SYSTEM DIAGRAM
 
 
WARNING MESSAGE DISPLAY CONDITION
When all of the following conditions are satisfied.
  • Automatic brake hold applied
  • Vehicle is moved; vehicle may start moving; or a malfunction is detected in automatic brake hold (chassis control module). Refer to Fail-safe.