Parking Brake Warning
DESIGN/PURPOSE
- Warns the driver of the necessity of depressing the brake pedal.
- Warns the driver of the necessity of releasing the parking brake.
Warning Message
| Design | Warning Message |
| — | Press brake pedal |
| — | Release parking brake |
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Applicable
SYNCHRONIZATION WITH WARNING CHIME
Applicable
SIGNAL PATH
The ABS actuator and electric unit (control unit) transmits a signal to the combination meter via CAN communication under the conditions bellow:
- When necessary to depress the brake pedal.
- When necessary to release the parking brake.
WARNING/INDICATOR OPERATING CONDITION
When the following conditions are satisfied (ignition switch ON)
- The parking brake switch is pushed without depressing the brake pedal.
- The parking brake is operated with the parking brake switch kept pulled during driving.
- The parking brake braking force is insufficient (vehicle is moving backward).
- When the vehicle is moving.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)