[Previous][Next]
Reference Value
 
 
VALUES ON THE DIAGNOSIS TOOL
cautionThe reference values in the table below come from the control unit calculation data. The normal values may in some cases be displayed even though the power circuit (harness) is open or shorted.
noteThe following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.
Monitor itemData monitor
ConditionReference values for normal operation
SET AIR PRESSURE 1 FLIgnition switch ONStandard air pressure
SET AIR PRESSURE 1 FRIgnition switch ONStandard air pressure
SET AIR PRESSURE 1 RRIgnition switch ONStandard air pressure
SET AIR PRESSURE 1 RLIgnition switch ONStandard air pressure
TPMS SET SWITCHSet switch is activeOn
Set switch is inactiveOff
Tire status-FLNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire pressure sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
Tire status-FRNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
Tire status-RRNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
Tire status-RLNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
Vehicle speedVehicle stopped0 km/h
Vehicle drivingIncreases according to vehicle speed
AIR PRESS FL
  • Drive at a speed of 40 km/h (25 MPH) or more then drive normally for 10 minutes.
  • Turn the ignition switch ON and use the activation tool to transmit the registration signal.
Tire air pressure
AIR PRESS FR
  • Drive at a speed of 40 km/h (25 MPH) or more then drive normally for 10 minutes.
  • Turn the ignition switch ON and use the activation tool to transmit the registration signal.
Tire air pressure
AIR PRESS RR
  • Drive at a speed of 40 km/h (25 MPH) or more then drive normally for 10 minutes.
  • Turn the ignition switch ON and use the activation tool to transmit the registration signal.
Tire air pressure
AIR PRESS RL
  • Drive at a speed of 40 km/h (25 MPH) or more then drive normally for 10 minutes.
  • Turn the ignition switch ON and use the activation tool to transmit the registration signal.
Tire air pressure
TIRE TEMPERATURE FLIgnition switch ONTire temperature
TIRE TEMPERATURE FRIgnition switch ONTire temperature
TIRE TEMPERATURE RRIgnition switch ONTire temperature
TIRE TEMPERATURE RLIgnition switch ONTire temperature
SET AIR PRESSURE 2 FLIgnition switch ONStandard air pressure
SET AIR PRESSURE 2 FRIgnition switch ONStandard air pressure
SET AIR PRESSURE 2 RRIgnition switch ONStandard air pressure
SET AIR PRESSURE 2 RLIgnition switch ONStandard air pressure
WARNING AIR PRESSURE FLIgnition switch ONIndicates warning air pressure front left tire
WARNING AIR PRESSURE FRIgnition switch ONIndicates warning air pressure front right tire
WARNING AIR PRESSURE RRIgnition switch ONIndicates warning air pressure rear right tire
WARNING AIR PRESSURE RLIgnition switch ONIndicates warning air pressure rear left tire
 
 
TERMINAL LAYOUT
Refer to Reference Value.
 
 
PHYSICAL VALUES
Refer to Reference Value.