[Previous][Next]
Inspection
 
 
INSPECTION AFTER REMOVAL
Check the following items, and replace the part if necessary.
  • Check components for deformation, cracks, and other damage.
  • Check boots of transverse link and steering outer socket ball joint for breakage, axial end play, and swing torque.
 
 
INSPECTION AFTER INSTALLATION
 
 
1. Check runout of disc rotor, when replaced the disc rotor. Refer to Inspection and Adjustment.
2. Check wheel sensor harness for proper connection. Refer to Exploded View.
3. Check the wheel alignment. Refer to Inspection.
4. Adjust neutral position of steering angle sensor. Refer to Work Procedure.