 | Companion flange lock nut |  | Companion flange |  | Electro-hydraulic coupling oil seal |
 | Electro-hydraulic coupling assembly |  | O-ring |  | Actuator assembly |
 | O-ring |  | Drive pinion oil seal |  | Drive pinion lock nut |
 | Pinion front bearing |  | Gasket |  | Drain plug |
 | Filler plug |  | Coupling oil tank cover |  | Filler plug |
 | Gear carrier |  | Collapsible spacer |  | Drive pinion adjusting shim |
 | Pinion rear bearing |  | Drive pinion |  | Drive gear |
 | Differential case |  | Side bearing |  | Side bearing adjusting shim |
 | Side oil seal |  | Rear cover |  | Stud bolt |
 | Pinion mate thrust washer |  | Pinion mate gear |  | Side gear thrust washer |
 | Side gear |  | Pinion mate shaft |  | Lock pin |
 | Outer circumference |  | Screw hole | | |
 : N·m (kg-m, in-lb) |
 : N·m (kg-m, ft-lb) |
 : Always replace after every disassembly. |
 : Select with proper thickness. |
 1: Apply gear oil. |
| 2: Apply electro-hydraulic coupling oil (Genuine part). |
| *: Apply anti-corrosion oil. |
 : Apply Genuine Silicone RTV or equivalent. Refer to Recommended Chemical Products and SealantsRecommended Chemical Products and Sealants . |
 : Apply Genuine High Strength Thread Locking Sealant or equivalent. Refer to Recommended Chemical Products and SealantsRecommended Chemical Products and Sealants. |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)