1. Run the vehicle to warm up the transfer unit sufficiently.
2. Stop the vehicle and turn the ignition switch OFF.
3. Remove drain plug 
and gasket. | : Vehicle front |
4. Drain transfer oil.| note | Removing filler plug can make the work easier. |
5. Set a gasket on drain plug and install it to transfer assembly.| caution | Never reuse gasket. |
6. Tighten drain plug to the specified torque. Refer to Exploded View
. ![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)