INSPECTION AFTER DISASSEMBLY
Bearing
- If unusual noise from the bearing is observed, replace electro-hydraulic coupling assembly.
Oil Seal
- Whenever disassembled, replace.
- If wear, deterioration of adherence (sealing force lips), or damage is detected on the lips, replace them.
Companion Flange
- Whenever disassembled, replace.
- If any chipped mark [about 0.1 mm, (0.004 in)] or other damage on the contact sides of the lips of the companion flange is found, replace.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)