Shift P Warning
DESIGN/PURPOSE
Shift P warning warns that the driver is getting off the vehicle with the shift position not in P position.
| Symbol | Message |
| Shift to P range |
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Applicable
SYNCHRONIZATION WITH WARNING (Buzzer)
Applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter, refer to
Fail-Safe
.
SIGNAL PATH
- TCM judges the shift position by the transmission range switch.
- BCM transmits a door switch signal to the TCM.
- The TCM judges the vehicle condition according to the shift position signal and the door switch signal. The TCM transmits a shift P range request display signal to the combination meter if the driver’s door is opened with the shift position not in P position.
WARNING/INDICATOR OPERATING CONDITION
When all of the following conditions are satisfied:
- Shift position: Except P position
- Front door (driver side): Open
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied:
- Shift position: P position
- Front door (driver side): Close
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)