System Description

The electric shift system detects each shift position electrically. In addition, in P position, the electric shift system activates the shift actuator, according to electrical signals received from the P position switch and brings the vehicle into the parking state.
In the event of a malfunction in the electric shift system, the selector indicator of electric shift selector turns OFF and only the shift indicator (on the combination meter) indicates the shift position.
In the event of a malfunction in the electric shift system, the system enters fail-safe mode. Refer to Fail-safe.

Component		Function
Electric shift control module		Mainly transmits the following signal to TCM via CAN communication Electric shift selector signal Electric shift malfunction signal Mainly receives the following signals from TCM via CAN communication Shift position signal Shift target signal
Electric shift selector		Refer to Electric Shift Selector.
Electric shift sensor		Refer to Electric Shift Sensor.
P position switch		Refer to P Position Switch.
Selector indicator		Refer to Selector IndicatorSelector Indicator.
Shift actuator		Refer to Shift Actuator.
Transmission range switch		Refer to Transmission Range SwitchTransmission Range Switch.
TCM		Mainly transmits the following signal to electric shift control module via CAN communication Shift position signal Shift target signal Mainly receives the following signals from electric shift control module via CAN communication Electric shift selector signal Electric shift malfunction signal
BCM		Mainly transmits the following signal to TCM via CAN communication Stop light switch signal Door switch signal Seat belt buckle switch (front LH) signal
ABS actuator and electric unit (control unit)		Mainly transmits the following signal to TCM via CAN communication Vehicle speed signal
Combination meter		Mainly receives the following signal from TCM via CAN communication Electric shift warning light signal Electric shift warning message signal Shift refuse buzzer signal Shift P range request display signal Neutral hold mode message signal