DTC Description

DTC DETECTION LOGIC

DTC		M.U.T.-III SE screen terms (Trouble diagnosis content)	DTC detection condition
P17F2	07	CVT JUDDER (T/C INSPECTION) [CVT Judder (Torque Converter Inspection)]	Diagnosis condition	—
			Signal	—
			Threshold	Malufunction in torque converter
			Diagnosis delay time	—

POSSIBLE CAUSE

Torque converter

FAIL-SAFE

Not changed from normal driving

DTC CONFIRMATION PROCEDURE

caution

Always drive vehicle at a safe speed.

1.CHECK DTC DETECTION

Start the engine.
With the accelerator pedal position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).
Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.
Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.
Repeat steps 2 to 4 above 5 times.
Check the DTC.

Is “P17F2–07” detected?

Go to Diagnosis ProcedureDTC Diagnosis Procedure

Inspection End.