Diagnosis Procedure
1.
CHECK DTC PRIORITY
With M.U.T.-III SE
Perform “Self-diagnosis” in “TRANSMISSION”.
Check the DTC whether it is related to the CVT system warning. Refer to
DTC Index
.
Is applicable DTC detected?
Perform diagnosis of applicable. Refer to
DTC Index
.
.
2.
CHECK DTC DETECTION
With M.U.T.-III SE
Start the engine.
Select “Data List” in “TRANSMISSION”.
Select “T/M warning indicator DTC”.
Confirm that detected DTC.
Is any DTC detected?
Review the detected DTC in the past which was displayed in the "Data List". Refer to
DTC Index
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Perform diagnosis of applicable. Refer to DTC Index.
.With M.U.T.-III SEReview the detected DTC in the past which was displayed in the "Data List". Refer to DTC Index.INSPECTION END