Component Inspection
1.
CHECK ENGINE OIL TEMPERATURE SENSOR
Turn ignition switch OFF.
Disconnect engine oil temperature sensor harness connector.
Remove engine oil temperature sensor.
Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure.
Engine oil temperature sensor
Condition
Resistance (kΩ)
Terminal
1
2
Temperature [°C (°F)]
20 (68)
2.37 - 2.63
50 (122)
0.68 - 1.00
90 (194)
0.236 - 0.260
Is the inspection result normal?
INSPECTION END
Replace engine oil temperature sensor. Refer to
Component Parts Location
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
INSPECTION END
Replace engine oil temperature sensor. Refer to Component Parts Location
.