Inspection
Alternator
Drive belt auto-tensioner
Crankshaft pulley
A/C compressor
Water pump
Drive belt
View A
B
Range when new drive belt is installed
C
Possible use range
Indicator (notch on the fixed side)
warning
Perform this step when engine is stopped.
Check that the indicator
(notch on fixed side) of drive belt auto-tensioner is within the possible use range (C) in the figure.
note
Check the drive belt auto-tensioner indication when the engine is cold.
When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B) in the figure.
Visually check entire drive belt for wear, damage or cracks.
If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
(notch on fixed side) of drive belt auto-tensioner is within the possible use range (C) in the figure.
